Charge the battery
Your battery has been partially charged at the factory, but
you may need to recharge it before you can switch on your
© 2011 Nokia. All rights reserved.
13
device for the first time. If the device indicates a low charge,
do the following:
1 Connect the charger to a wall outlet.
2 Connect the charger to the device. The charging indicator
light next to the micro-USB connector is lit when the
battery is being charged.
3 When the device indicates a full charge, disconnect the
charger from the device, then from the wall outlet.
You do not need to charge the battery for a specific length of
time, and you can use the device while it is charging. If the
battery is completely discharged, it may take several minutes
before the charging indicator appears on the display or
before any calls can be made.
Tip: Disconnect the charger from the wall outlet when the
charger is not in use. A charger that is connected to the outlet
consumes power even when it is not connected to the device.
USB charging
You can use USB charging when a wall outlet is not available.
With USB charging, you can also transfer data while charging
the device.
1 Connect a compatible USB device to your device using a
compatible USB cable.
The efficiency of USB charging varies significantly. In
some cases, it may take a very long time for charging to
start and the device to start functioning.
2 If your device is switched on, you can select from the
available USB mode options on the display of the device.
During extended operation such as an active video call and
high speed data connection, the device may feel warm. In
most cases, this condition is normal. If you suspect the device
is not working properly, take it to the nearest authorised
service facility.